Products

Description: Hammer head screw for fastening support triangles. The hammer head screws connect the mounting system to the profile rails. The hammer head rotates in the channel of the mounting rail and locks the profile. The thread of the screw looks out of the profile. The nut locks with locking teeth to prevent the screw from loosening. Hammer head suitable for profile 28/15 Scope of delivery: 1 hammer head screw M10 25mm 1 nut with locking teeth M10

Read more less

Description: Hammer head screws are used to attach mounting accessories such as roof hooks, support triangles or hanger screws. The hammer head screws connect the mounting system to the profile rails. The hammer head rotates in the channel of the mounting rail and locks the profile. The thread of the screw looks out of the profile. The nut locks with locking teeth to prevent the screw from loosening. The hammer head complies with DIN933 and therefore fits perfectly into the channel of the profile rail. Scope of delivery: 1 hammer head screw M10 32.5mm 1 nut with locking teeth M10

Read more less

Original MC4 plug or socket including metal inlay for producing solar cables 4mm² - 6mm² Solar modules are connected with solar cables. These in turn are connected using MC4 connectors with clear advantages. Firm connection of solar module cable and extension Protection against water, light, cold & heat Contact protection Usually the metal inlays are crimped with the cable to create a firm connection. Alternatively, the metal piece can also be soldered. The polarity would also be important, as this is assigned exactly the opposite way with MC4 plugs than at first glance. The square plastic plug is the male plug. The plug with a pin in the middle is the female plug. The cause here is the metal parts and you can see that the metal part of the pin plug is larger than the metal part of the square plastic plug. Packaging Unit: 1 piece

Read more less

The middle clamp is a practical and simple component for securely attaching solar modules. After being pulled into the profile rail, the clamp sits securely and firmly on the module. The clamp can be easily moved in the channel of the profile rail for installation. The middle clamp attaches two modules on the left and right. The middle clamp can be used universally for any module height. Delivery including all required assembly parts. Scope of delivery: End clamp lock washer M8 cylinder head screw (stainless steel) T-nut

Read more less

Description The trapezoidal sheet metal mounting base is ideal for watertight installation on the raised beads of trapezoidal sheet metal roofs. A solar module is installed directly on the trapezoidal sheet metal bridge. Optionally, adapter feet can be inserted into the rail and an additional inclination of 5 or 7 degrees is achieved. By clamping on the long side of the module frame, the module maintains the best possible load capacity. Thanks to thread-cutting screws, fastening takes place without pre-drilling. Screws and already glued EPDM seal prevent moisture from penetrating. The modules can be attached horizontally or vertically directly to the mounting rails or adapter feet using module clamps. scope of delivery 1 x mounting rail 40cm Complementary products: Mounting foot plus Sheet metal screw trapezoidal sheet metal Front adapter, flat Rear adapter, high Search terms: mounting set trapezoidal sheet metal trapezoid

Read more less

Description The trapezoidal sheet metal mounting base is ideal for watertight installation on the raised beads of trapezoidal sheet metal roofs. A solar module is installed directly on the trapezoidal sheet metal bridge. Optionally, adapter feet can be inserted into the rail and an additional inclination of 5 or 7 degrees is achieved. By clamping on the long side of the module frame, the module maintains the best possible load capacity. Thanks to thread-cutting screws, fastening takes place without pre-drilling. Screws and already glued EPDM seal prevent moisture from penetrating. The modules can be attached horizontally or vertically directly to the mounting rails or adapter feet using module clamps. scope of delivery 1 adapter high for mounting the rear side of the module Complementary products: Mounting foot plus Sheet metal screw trapezoidal sheet metal Front adapter, flat Rear adapter, high Search terms: mounting set trapezoidal sheet metal trapezoid

Read more less

Description The trapezoidal sheet metal mounting base is ideal for watertight installation on the raised beads of trapezoidal sheet metal roofs. A solar module is installed directly on the trapezoidal sheet metal bridge. Optionally, adapter feet can be inserted into the rail and an additional inclination of 5 or 7 degrees is achieved. By clamping on the long side of the module frame, the module maintains the best possible load capacity. Thanks to thread-cutting screws, fastening takes place without pre-drilling. Screws and already glued EPDM seal prevent moisture from penetrating. The modules can be attached horizontally or vertically directly to the mounting rails or adapter feet using module clamps. scope of delivery 1 adapter at the front for mounting the front side of the module Complementary products: Mounting foot plus Sheet metal screw trapezoidal sheet metal Front adapter, flat Rear adapter, high Search terms: mounting set trapezoidal sheet metal trapezoid

Read more less

Description: The mounting plate connects profile rails to the support triangle flat roof system. Four mounting plates are required for each support triangle. The grooved back connects firmly to the nut and locks the screw in the profile rail channel. Scope of delivery: Mounting plate M10 hammer head screw M10 nut with locking teeth

Read more less

Solar profile strip - mounting rail 40x40mm Mounting rails are mainly used for roof mounting, wall mounting and balcony mounting. In order to guarantee the weather resistance of your system, we strongly recommend secure installation with a rail or a professional fastening system. The advantages of rail are obvious Easy to handle and align (level) Variable in orientation (horizontal, vertical) Safety of installation (slot nuts, clamps, etc. are firmly anchored in the mounting channel) Clearly defined channels 1.) for module fastening and 2.) for mounting fastening (roof hooks, elevations, balcony holders, etc.) prevent confusion or incorrect installation Please order the fastening material required for module assembly such as slot nuts, module end clamps, middle clamps and cylinder head screws separately. Please order mounting materials for fastening (balcony fastenings, roof hooks, washer head screws, hanger screws) separately and can be viewed in the shop. 1 module horizontal = 2 x mounting rail 1.1m 1 module vertical = 2 x mounting rail 1.80m If you have any questions about the right mounting material, please feel free to contact us.

Read more less

Elevation balcony power plant flat roof The solar elevation 20° - 40° mounting set consists of solid elevation triangles. The inclination of the modules can be flexibly adjusted between 20° and 40°. In order to always achieve the highest power yield, the tilt angle is adjusted to a flat 20° in summer and to a maximum tilt of 40° in winter. We wish you a good solar harvest. In just a few simple steps you can become a power generator, take a look at our assembly instructions . Find our assembly video here. The set is suitable for modules with a width of up to 115cm Assembly: Two support triangles are required to attach a module. Three support triangles are required to attach two modules in a row. View our assembly instructions here. Additional required mounting material in the form of profile rails, fastening screws, middle and end clamps, and covers are part of the offer. To ensure safe installation, the assembly must be weighed down or firmly anchored. The support triangles can be weighted down with stone slabs or curbs without drilling. Our basic flat roof installation set provides for vertical installation (ie in portrait orientation). If you want to mount your modules horizontally, i.e. across (landscape), you will need longer profile rails. Call us or send us an email with your request and we will send you an offer. Scope of delivery: Assembly triangles Profile rails in 1.20m length Mounting plate End caps End clamps & if necessary middle clamps Additional Information: Balcony power plant on the carport / flat roof Balcony power plant on the flat roof - electricity in 15 minutes Search terms: mounting set for elevation 20 40 flat roof,

Read more less

Description: The hanger screw mounting set is perfect for waterproof installation on sheet metal roofs with a wooden substructure. The hanger bolt has a wood or dowel thread on one side and a metal thread on the other side. The extra-long metal thread offers enough flexibility for height adjustment. Installation is carried out using a standard screwdriver and key attachment. You can find the assembly video here The set is suitable for modules up to a width of 115cm Fastening set of hanger screws for corrugated iron, sheet metal roofs, corrugated panels (1 module) 4 hanger bolts M10, 250mm 4 adapter plates for connecting hanger bolts and profile 2 aluminum profile rails 1.20m 4 cover caps for aluminum profile rails 4 end clamps including screws for module attachment Hanger screw fastening set (2 modules) 6 hanger bolts M10, 250mm 6 adapter plates for connecting hanger bolts and profile 2 aluminum profile rails approx. 2.10m (or 4 x 1.20m with connecting rails) 4 cover caps for aluminum profile rails 4 end clamps including screws for module attachment 2 middle clamps for module attachment A mounting set contains all screws, washers, etc. for attaching one or two modules.

Read more less

Description The trapezoidal sheet metal installation set is ideal for waterproof installation on the raised beads of trapezoidal sheet metal roofs. With the Trapezoidal Sheet Plus mounting set you have the option of mounting your modules both horizontally and vertically. The adapter rails allow you to raise your modules by up to 7 degrees and thus generate electricity more effectively. By clamping on the long side of the frame, the module maintains the best possible load capacity. Thanks to special sheet metal screws, fastening takes place without pre-drilling. Screws and already glued EPDM sealing rings prevent moisture from penetrating. The module is mounted directly on the mounting rails or with additional mounting adapters using module clamps. Click here for the data sheet and assembly instructions Fastening set for trapezoidal sheet metal (1 module) 4 x mounting rails (10cm) including seal 2 x front adapters 2 x rear adapters 4 x end clamps including screws for module attachment 4 x Rhombus Nuts 16 x Sheet Metal Screws Fastening set for trapezoidal sheet metal (2 modules) 6 x mounting rails (10cm) including seal 3 x front adapters 3 x rear adapters 4 x end clamps including screws for module attachment 2 x Middle Clamps 6 x Rhombus Nuts 24 x Sheet Metal Screws Complementary products: Mounting foot plus Sheet metal screw trapezoidal sheet metal Front adapter, flat Rear adapter, high A mounting set contains all screws, washers, etc. for attaching one or two modules. If necessary, slightly different systems are used. Search terms: mounting set trapezoidal sheet metal

Read more less