Accessories (cables, connectors, fastening materials, etc.)

M8 cylinder head screw with hexagon socket for mounting inverters. The screw enables the inverter to be firmly installed directly in the channel of the profile rail. The inverter is installed protected under the modules. The screw is delivered including the lock washer and the slanted nut (hammer head threaded nut). Scope of delivery: 1 cylinder head screw M8 16mm or 20mm 1 lock washer 1 rhombus nut

Read more less

Description: The mounting plate connects profile rails to the support triangle flat roof system. Four mounting plates are required for each support triangle. The grooved back connects firmly to the nut and locks the screw in the profile rail channel. Scope of delivery: Mounting plate M10 hammer head screw M10 nut with locking teeth

Read more less

Mounting triangle elevation 20° - 40° made of solid aluminum. The inclination of the modules can be flexibly adjusted. In order to always achieve the highest power yield, the angle of inclination is adjusted to an ideal 32° in summer and to a maximum inclination of 40° in winter. The individual mounting triangle is only used to supplement a complete set of flat roof mountings. Further parts for the finished assembly stand are - Profile rails - Mounting plate including hammer head screw - End clamps & middle clamps Assembly: Two support triangles are required to attach a module. Three support triangles are required to attach two modules in a row. View our assembly instructions here. To ensure safe installation, the assembly must be weighed down or firmly anchored. The support triangles can be weighted down with stone slabs or curbs without drilling. Scope of delivery: 1 x elevation triangle Complementary products: Complete set for flat roof mounting profile rail Mounting plate End clamps Middle clamps Slide-in connector End cap Open questions? Call Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the subject of balcony power plants

Read more less

Schuko plug IP54 made of solid rubber for quick and safe installation - complete protection against contact - Protection against splashing water

Read more less

Original MC4 plug or socket including metal inlay for producing solar cables 4mm² - 6mm² Solar modules are connected with solar cables. These in turn are connected using MC4 connectors with clear advantages. Firm connection of solar module cable and extension Protection against water, light, cold & heat Contact protection Usually the metal inlays are crimped with the cable to create a firm connection. Alternatively, the metal piece can also be soldered. The polarity would also be important, as this is assigned exactly the opposite way with MC4 plugs than at first glance. The square plastic plug is the male plug. The plug with a pin in the middle is the female plug. The cause here is the metal parts and you can see that the metal part of the pin plug is larger than the metal part of the square plastic plug. Packaging Unit: 1 piece

Read more less

Description: Hanger screws are perfect for waterproof installation on roofs with a wooden substructure, as well as stone or concrete roofs. Hanger screws can also be easily used on facades. The hanger bolt has a wood or dowel thread on one side and a metal thread on the other side. The extra-long metal thread offers enough flexibility for height adjustment. Installation is carried out using a standard screwdriver and hexagonal key attachment. Here is the appropriate assembly video. scope of delivery 1 x hanger bolt M10, 200mm 1 x Rubber Seal 3 x nuts with locking teeth 1 x adapter plate for connecting hanger screw and profile Further material for complete assembly profile rail End Clamps & Middle Clamps Profile connector End caps

Read more less

For mounting roof hooks and feet in wood Quick installation without pre-drilling in rafters and wooden beams. High pressure force thanks to the large contact surface and good power transmission thanks to the Torx40 drive. scope of delivery Washer head screw M8 x 80

Read more less

Description: Wieland surface-mounted socket for the system socket. The surface-mounted box, suitable for the Wieland socket frame. Surface-mounted box RST 20/25 Article no. 99.404.9999.7 Click here for the manufacturer's description and assembly instructions scope of delivery 1 x surface-mounted box Matching: mounting frame & socket

Read more less

The standard-compliant connection for mini PV and balcony power plants. In addition to the Wieland feed-in socket, a standard-compliant connection can also be ensured by permanently installing it on your house connection. For example, fixed installation via luster terminals or installation terminals is suitable for this. Alternatively, the Spelsberg surface-mounted box can also be equipped with the Wieland socket part scope of delivery 1 x surface-mounted frame with cover IP54 Complementary products: Wieland socket Schuko plug Wieland plug Open questions? Call Call us (02761/ 606 91 57) FAQ with the most important questions and answers Blog posts on the subject of balcony power plants

Read more less

Cylinder head screw M8 with hexagon socket according to Din912 The M8 cylinder head screws made of A2 stainless steel are used to fasten end clamps and middle clamps. Certified according to DIN 912, the screw is used in the construction industry, but also in mechanical and plant engineering. In the solar industry, the screw is primarily used to fasten modules with end and middle clamps. In combination with a lock washer and a sliding block, clamps are firmly connected to solar modules and profile rails. Which screw length do I need for which solar module / frame height? 35mm screw length -> 30mm end clamp / module height 40mm screw length -> 35mm & 38mm end clamp / module height scope of delivery - M8 cylinder head screw

Read more less

Description The trapezoidal sheet metal mounting base is ideal for watertight installation on the raised beads of trapezoidal sheet metal roofs. A solar module is installed directly on the trapezoidal sheet metal bridge. Optionally, adapter feet can be inserted into the rail and an additional inclination of 5 or 7 degrees is achieved. By clamping on the long side of the module frame, the module maintains the best possible load capacity. Thanks to thread-cutting screws, fastening takes place without pre-drilling. Screws and already glued EPDM seal prevent moisture from penetrating. The modules can be attached horizontally or vertically directly to the mounting rails or adapter feet using module clamps. scope of delivery 1 x mounting rail 40cm Complementary products: Mounting foot plus Sheet metal screw trapezoidal sheet metal Front adapter, flat Rear adapter, high Search terms: mounting set trapezoidal sheet metal trapezoid

Read more less

Sheet metal screw for reliably fastening photovoltaic products in trapezoidal sheet metal roofs. The pre-assembled EPDM sealing washer prevents water from penetrating the substructure. The bimetal screw allows screwing in without pre-drilling. The double-start thread ensures chip-free assembly and quick installation. The screw is made of A2 stainless steel and galvanized Scope of delivery: 1 x Screw with Seal Ring Complementary products: Mounting foot plus Sheet metal screw trapezoidal sheet metal Front adapter, flat Rear adapter, high Search terms: mounting set trapezoidal sheet metal trapezoid

Read more less